Petroleum and solid fuel analysis laboratory; It is an
accredited laboratory within the center of research. The coal and fuel oil
samples coming to the laboratory are first taken by the sample acceptance
officer and transmitted to the laboratory officer using the pegasoft software
program and then delivered to the responsible specialist together with the
witness sample. If the example is fuel oil, the analysis is started in the
laboratory according to the desired parameters. The study of 6 accredited parameters
is currently performed in the fuel oil sample. In coal, the analysis of 2
parameters is carried out in accredited scope. Analyzes; It is made according
to TSE, and results are calculated and delivered according to these standards.
Sulfur/Carbon Determinator
LECO SC 144DR Coded device is used to analyze carbon and
sulfur in petroleum products, Fuel Oil and Coal samples.
Karl Fischer titrator
The Karl Fischer Moisture Analyzer is used to analyze the
moisture content of the Fuel Oil Samples
Kinematic Viscosity Analyzer
Kinematic Viscosities of Fuel Oil samples are analyzed by
Polyscience brand kinematic viscometer bath.
Muffle furnace
With the Ash Furnace device of Protherm brand, the analysis
of the amount of Ash in Fuel Oil and Coal samples as well as Volatile matter
analysis in coal samples are also performed.
Moisture Analyzer
Analyzes of coal samples are made with the precision balance
moisture analyzer of Bel brand.
Sedimentation Detection Device
Total sedimentation tests of liquid petroleum products are performed
Calorimeter
LECO AC 500 coded calorimeter device for coal and fuel oil samples of the lower thermal values and upper thermal values analysis is done.
Cloud and Pour Point
Pour Point of Fuel Oil samples are analyzed from LABO brand Flowing Cloud device.