UTM-4000 Hydraulic Universal Testing Device is designed to be used in testing values such as yield and tensile strength of metal materials, especially iron reinforcement used in structures, etc. In addition to tensile tests, the Universal Testing Machine also provides the opportunity to perform compression tests up to its capacity. Movement limits in the lower jaw and piston and hydraulic safety valves in the hydraulic system provide maximum safety in the 600 kN capacity Universal Test Device. The hydraulic power unit operates extremely quietly. Tests can be performed on flat samples with diameters between 0-40 mm and round samples with diameters between 8-32 mm with easy-to-use jaws that comply with all standards. A load cell is used for load measurements. Strain measurements are measured with an electronic displacement sensor built into the device. If necessary, strain measurement can be made by means of an external Extensometer directly connected to the sample. UTM-4000 Hydraulic Universal Testing Device is designed to be used in testing values such as yield and tensile strength of metal materials, especially iron reinforcement used in structures, etc. In addition to tensile tests, the Universal Testing Machine also provides the opportunity to perform compression tests up to its capacity. Movement limits in the lower jaw and piston and hydraulic safety valves in the hydraulic system provide maximum safety in the 600 kN capacity Universal Test Device. The hydraulic power unit operates extremely quietly. Tests can be performed on flat samples with diameters between 0-40 mm and round samples with diameters between 8-32 mm with easy-to-use jaws that comply with all standards. A load cell is used for load measurements. Strain measurements are measured with an electronic displacement sensor built into the device. If necessary, strain measurement can be made using an external extensometer directly connected to the sample.

UTEST automatic 200 kN, 300 kN and 600 kN capacity bending test presses, bending tests of concrete beams of different sizes and properties, concrete or natural stone curbs, concrete terrazo tiles, concrete covering slabs for flooring and natural covering stone, splitting and pulling of concrete paving stones Designed for use in experiments. All automatic bending test presses are developed as a result of continuous research and development activities using the latest technologies, in accordance with TS EN 12390-5, TS EN 12390-6, TS EN 1338, TS EN 1340, BS 1881, ASTM C78, C293 and C496 standards. It was designed and produced taking into consideration the demands. Flexural test presses also meet the requirements of all CE norms regarding operator health and safety. UTEST automatic bending test presses allow operators who do not have sufficient experience to perform experiments without any problems. Experiments can be carried out on a computer using the BC 100 Automatic Control and Data Acquisition Unit or with the UTEST software provided free of charge with the presses. The advantages of performing experiments on a computer with UTEST software (reporting, graphic output, etc.) can be seen in the software section.

Beton Concrete Testing Press Bodies are designed and manufactured with a solid and stable structure, aiming to obtain test results with the repeatability and accuracy needed for many years. In order to create easy access and efficient and safe working conditions, the hydraulic power units and data control and reading units they will be used with are planned to be positioned on the right side of the load bodies.

• Thanks to its 4080 Watt super powerful engine, it easily performs many difficult drilling operations.
• 230 mm wide drilling capacity
• 500 mm deep drilling capacity
• Ability to perform wet processing to facilitate the drilling process
• Easily transportable thanks to sturdy wheels
• On/off button supported by dust and water resistant silicone
• High Engine Power

UTC series Cutting Machine is used to prepare rock, natural stone and concrete core samples for compressive strength testing.